Categories: Hand Tools
1404-H2600
Universal Coil Spring Compressor 2600 Kg
Login to view prices
› It is a tool used for quick and professional removal and installation of suspension struts.
› Designed for the McPherson struts with crown and cylinder springs
› High capacity of max. Load: 26,000 Nm
› Min. Spring diameter 80 mm
› Max. Spring diame
Categories: Hand Tools
1404-H1200
Universal Coil Spring Compressor 1200 Kg
Login to view prices
› It is used for quick and professional compressing of coil springs.
› The compression force is approximately 1200 kg.
› The maximum gap is 300 mm.
› It has 3 compressing head pairs that are
70-105 mm, 90-140 mm, and 130-190 mm long.
› It has a speci
Categories: Hand Tools
1404-MTS900
Foldable Engine Stand 900 Kg
Login to view prices
› Provides easy operation on the engine.
› Lifting capacity: 900 kg
› Thick chassis
› 6 wheels
› Folding feets
› 360 degree swivel
› Working height: 840 mm
Categories: Hand Tools
1404-E500
Engine Hanger 750x1450 500 Kg
Login to view prices
It has threaded rods, hook (M20 x 2.5) and a powerful square tube for mounting and demounting of the engine and transmission.
Its width is adjustable. Protects the fenders by its rubber pads. It has a double chain with a length of 90 cm.
Categories: Hand Tools
1404-B05T
Hydraulic Transmission Jack 500 Kg
Login to view prices
› It is used for checking and dismounting of engine, transmission box and rear axle.
› Its approximate height is 140 to 195 cm.
› It has 4 caster wheels.
› It has a compact and lightweight structure.
› Provides wide lifting range.
› Due to its hydrau
Categories: Hand Tools
1404-KS6T
Jack Stands 6 T
Login to view prices
› It is used to lift the vehicles.
› It has a length of 310 mm,
› A width of 265 mm and
› A height of 460 mm.
› Its maximum lifting height is 613 mm,
› The minimum lifting height is 395 mm and
› The lifting capacity is 6000 kg.
Categories: Hand Tools
1404-KS3T
Jack Stands 3 T
Login to view prices
› It is used to lift the vehicles.
› It has a length of 225 mm,
› A width of 205 mm and
› A height of 360 mm.
› Its maximum lifting height is 428 mm,
› The minimum lifting height is 288 mm,
› And the lifting capacity is 3000 kg.
Categories: Hand Tools
1404-KF5T
Formula Trolley Jack 5 T
Login to view prices
› Vehicle lifting jack with polished and machined cylinder.
› Uses high performance seals.
› It extends the life of the seals by minimizing the wear.
› It has a transport trolley with 2 wheels and a carrying handle.
› The minimum height is 90 mm and
Categories: Hand Tools
1404-KF3T
Formula Trolley Jack 3 T
Login to view prices
› Is a lifting trolley jack with the polished and machined cylinder.
› That uses high-performance gaskets.
› It extends the life of gaskets by minimizing corrosion.
› It has a 2-wheeled transport cart and a carrying handle.
› It has a length of 640 m
Categories: Hand Tools
1404-SSU280
Sprial Spring Strainer Device Universal
Login to view prices
› The spring compressor tool is an ideal product for installing and
removing the spiral spring on the front and rear axles.
› It has stepless adjustment, easy and safe use.
› Spring tension for spiral springs is 1500 kg (1.5 tons).
› Width 280 mm.
›
Categories: Hand Tools
1404-638
Triple Leg Reversible Puller 20-22 Mm
Login to view prices
Used to remove ball bearings. The opening range is 20-22 mm. The gap can be adjusted to two different positions from 30 to 55 mm.
Categories: Hand Tools
1500-66525
Axial Joint Tool 35-45
Login to view prices
Used for fast and professional changing of the axial joints of cars and light commercial vehicles and automatic clamping of the joint heads. Provides easy assembly of long tie rods because of its open structure.
Saves up to 3 hours of working time.
›
Categories: Hand Tools
1500-66526
Axial Joint Tool 28-35
Login to view prices
Used for fast and professional changing of the axial joints of cars and light commercial vehicles and automatic clamping of the joint heads. Provides easy assembly of long tie rods because of its open structure.
Saves up to 3 hours of working time.
›
Categories: Hand Tools
1404-HTC
Hydraulic Pull Back Ram 5 T
Login to view prices
› It is a hydraulic reverse puller used in passenger cars, heavy vehicles, tractors and situations that require reverse pull.
› Min. Length: 540 mm
› Max. Length: 670 mm
› Working Pressure: 68 Mpa
› Stroke: 130 mm
› Read the instructions before use.
Categories: Hand Tools
1500-7774S
Hydraulic Drive Shaft Puller Set
Login to view prices
Scope of delivery: 1 x BRIO driveshaft extractor set 3 in 1
Drive shaft extractor set is special product for hydraulic wheel hub puller for perfect assembly and disassembly of wheel bearings. Especially suitable for glued and rusted drive shafts moun
Categories: Hand Tools
1500-7726
External / İnternal 3-Arm Puller 150 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 150 mm
› Hooked foot: 10.5 mm
› Hook length: 28 mm
› Min. clamping width: 25 mm
› Spindle length: 175 mm
› Hex drive size: SW 17
› Max. clamping width: 160 mm
Categories: Hand Tools
1500-7724
External / İnternal 3-Arm Puller 100 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 100 mm
› Hooked foot: 10 mm
› Hook length: 25 mm
› Min. clamping width: 20 mm
› Spindle length: 150 mm
› Hex drive size: SW 15
› Max. clamping width: 110 mm
›
Categories: Hand Tools
1500-7723
External / İnternal 3-Arm Puller 75 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 75 mm
› Hooked foot: 6.5 mm
› Hook length: 19 mm
› Min. clamping width: 80 mm
› Spindle length: 100 mm
› Hex drive size: SW 14
› Max. clamping width: 100 mm
›
Categories: Hand Tools
1500-7718
External / İnternal 2-Arm Puller 200 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 200 mm
› Hooked foot: 18 mm
› Hook length: 37.5 mm
› Min. clamping width: 40 mm
› Spindle length: 235 mm
› Hex drive size: SW 19
› Max. clamping width: 225 mm
Categories: Hand Tools
1500-7716
External / İnternal 2-Arm Puller 150 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 150 mm
› Hooked foot: 9.5 mm
› Hook length: 27.5 mm
› Min. clamping width: 25 mm
› Spindle length: 175 mm
› Hex drive size: SW 17
› Max. clamping width: 195 m
Categories: Hand Tools
1500-7714
External / İnternal 2-Arm Puller 100 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 100 mm
› Min. clamping width: 20 mm
› Max. clamping width: 110 mm
› Gross weight: 710 g
› Surface finish: Galvanised, electroplated
Categories: Hand Tools
1500-7713
External / İnternal 2-Arm Puller 75 Mm
Login to view prices
› It is forged and reversible.
It has the following technical properties:
› Clamping depth: 75 mm
› Hooked foot: 6 mm
› Hook length: 19 mm
› Min. clamping width: 90 mm
› Spindle length: 100 mm
› Hex drive size: SW 14
› Max. clamping width: 110 mm
› H
Categories: Hand Tools
1500-3544
Air İnflating Pillow
Login to view prices
Used for spreading e.g. door frames for emergency opening or repairs. Hand pump and valve are included. It has the following technical properties:
› Dimensions: 160 x 160 mm
› Thickness: 2 mm (airless), 70 mm (inflated)
› Gross weight: 290 g
› Hand p
Categories: Hand Tools
1500-7798
Windscreen Wiper Arm Puller | Universal
Login to view prices
› For removing of front and rear wiper arms
› Brass pressure sleeve prevents damage to the thread
› 360° rotatable puller arms
› Handwheel, no additional tool required
› Chrome plated base, press sleeve brass made hardened spindle
You're viewed 24 of 280 products
Load More